With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - chris king! with our valves for life guarantee and their stunning colourways your bike is in for a real treat for years to come!
Made from lightweight anodised 7075 aluminium, Peaty’s tubeless valves are available in 42mm and 60mm lengths and fit most tubeless rims including carbon, Enduro and DH rims.
The large soft rubber base easily creates an airtight seal on valve holes up to 8mm diameter. The integrated valve core remover caps make removing the valve and topping up with sealant a breeze when in the workshop or on the trails.
🔥 VALVES FOR LIFE
If you manage to break, snap, bend or crack our valves* then we'll fix or replace them free of charge!
🛠️ FITTING INSTRUCTIONS:
Remove valve cap, o-ring and lock nut
Insert valve through valve hole in rim
Push the o-ring onto valve stem
Thread the lock nut onto valve stem
Hand tighten lock nut until firm
Screw on valve cap
🛠️ VALVE CORE REMOVAL
To de-core the valve, all you need to do is:
Unscrew the valve cap
Slot the valve cap over the valve core
Twist anticlockwise until the core can be pulled out
Repeat in reverse to refit
📝 *REALLY? FOR LIFE?!
Ok so there's a few conditions. Valves are warranted for life to the original owner only. Valves will not be warranted in the following situations:
If they have snapped or threaded from being over-tightened
If they have clogged with sealant
If they have been intentionally broken
If parts have been lost
The return process is easy - simply fill out our warranty form here and we'll get back to you asap. Please ensure you have a photo or PDF of your proof of purchase and photos of your damaged valves ready to send us.